Evaluation Board User Guide
UG-025
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
•
www.analog.com
Universal Evaluation Board for Triple, High Speed Op Amps
Offered in 16-Lead LFCSP Packages
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 8
FEATURES
Enables quick breadboarding/prototyping
User-defined circuit configuration
Edge-mounted SMA connector provisions
Easy connection to test equipment and other circuits
RoHS compliant
GENERAL DESCRIPTION
The Analog Devices, Inc., EB-O16CP-3Z universal evaluation
board is designed to help users evaluate triple, high speed op
amps offered in 16-lead LFCSP packages. The EB-O16CP-3Z is
a bare board (that is, there are no components soldered to the
board) that enables users to quickly prototype a variety of triple
op amp circuits, which minimizes risk and reduces time to market.
Figure 1 shows the component side of the bare evaluation board,
and Figure 2 shows the circuit side of the bare evaluation board.
The 2-layer evaluation board accepts SMA edge-mounted con-
nectors on the inputs and outputs for efficient connection to test
equipment or other circuitry. The ground plane, component
placement, and supply bypassing are designed to minimize
parasitic inductance and capacitance.
Figure 3 shows the evaluation board schematic. The PCB
assembly drawings are shown in Figure 4 and Figure 5. The
layout pattern for the PCB is shown in Figure 6 and Figure 7.
EVALUATION BOARD, COMPONENT SIDE AND CIRCUIT SIDE
08
15
1-
00
1
NOTES
1. THE EVALUATION BOARD SILKSCREEN PART NUMBER
LABELING ON YOUR BOARD MAY BE DIFFERENT FROM
WHAT IS SHOWN HERE.
Figure 1. Component Side of Evaluation Board
08
15
1
-00
2
NOTES
1. THE EVALUATION BOARD SILKSCREEN PART NUMBER
LABELING ON YOUR BOARD MAY BE DIFFERENT FROM
WHAT IS SHOWN HERE.
Figure 2. Circuit Side of Evaluation Board
