1
dc2510afa
DEMO MANUAL
DC2510A
DESCRIPTION
Shield Board for Use with
DC2321A Dust Demo Board
Demonstration circuit DC2510A is a shield board for use
with the DC2321A Dust
®
application demo board. This
board is designed to allow users to build their own custom
application circuits directly on the DC2321A with access
Dust mote.
The board offers footprints of common sensor and IC
packages as well as prototyping space for routing. The
following footprints are included on the board:
TOP
BOTTOM
n
MSSOP-10 (
×
2)
n
SOT-23 (
×
4)
n
TS8 (
×
2)
n
TSOT-23-8 (
×
2)
n
SOIC-20 (
×
2)
n
SSOP-20 (
×
2)
n
DFN-20 (
×
2)
Power rails and grids of copper pads (in both 2mm and
2.54mm pitch) form a solderable breadboard, and the IC
footprints allow easy mounting of surface-mount packages.
Each pin on the footprints and headers also connects to
a copper-plated hole for easy wiring.
L
, LT, LTC, LTM, Linear Technology, the Linear logo and Dust are registered trademarks of
Analog Devices, Inc. All other trademarks are the property of their respective owners.
BOARD PHOTO
The headers on the board are designed to fit into the
LTP5901-IPM header layout on the DC2321A. The long
pins of the headers allow wiring below the board and give
users a place to clip grabber leads.
The headers are also stackable, allowing multiple DC2510A
boards to be connected vertically, all with access to the
pins on the DC2321A. This allows a user to create different
applications on multiple DC2510A boards and swap them
out or combine them as desired.
Please refer to the DC2321A demo manual and
LTP5901-IPM data sheet for operation information and
input limits. The application section of this demo manual
describes the system level functionality of this board and
the various ways it can be used in early design prototyping.
Design files for this circuit board are available at
http://www.linear.com/demo/DC2510A
Figure 1. DC2510A
