manualshive.com logo in svg

Analog Devices Blackfin ADSP-BF537, Справочник по аппаратуре

Поделиться
Скачать
Analog Devices Blackfin ADSP-BF537 Скачать руководство пользователя страница 696

Register Descriptions

11-36

ADSP-BF537 Blackfin Processor Hardware Reference

 

•

Issue stop condition

 (

STOP

)

[1] The transfer concludes as soon as possible avoiding any error 
conditions (as if data transfer count had been reached) and at that 
time the TWI interrupt mask register (

TWI_INT_MASK

) is updated 

along with any associated status bits.

[0] Normal transfer operation.

•

Fast mode (

FAST

)

[1] Fast mode (up to 400K bits/s) timing specifications in use.

[0] Standard mode (up to 100K bits/s) timing specifications in use.

•

Master transfer direction (

MDIR

)

[1] The initiated transfer is master receive.

[0] The initiated transfer is master transmit.

•

Master mode enable (

MEN

)

This bit self clears at the completion of a transfer. This includes 
transfers terminated due to errors.

[1] Master mode functionality is enabled. A start condition is gen-
erated if the bus is idle.

[0] Master mode functionality is disabled. If this bit is cleared dur-
ing operation, the transfer is aborted and all logic associated with 
master mode transfers are reset. Serial data and serial clock (SDA, 
SCL) are no longer driven. Write-1-to-clear status bits are not 
affected.

Содержание Blackfin ADSP-BF537



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды