Purpose of This Manual
xii
ADSP-BF706 EZ-KIT Mini Evaluation System Manual
• Other features
• ADSP-BF706 EZ-KIT Mini for Arduino Uno R3
connectivity
• Boot mode strapped to SPI master
• 0.051 ohm resistors for processor current measurement
For information about the hardware components of the EZ-KIT Mini,
refer to
ADSP-BF706 EZ-KIT Mini Bill Of Materials
.
Purpose of This Manual
The
ADSP-BF706 EZ-KIT Mini Evaluation System Manual
provides
instructions for installing the product hardware (board). The text
describes operation and configuration of the board components and pro-
vides guidelines for running your own code on the ADSP-BF706 EZ-KIT
Mini. Finally, a schematic and a bill of materials are provided for
reference.
Intended Audience
The primary audience for this manual is a programmer who is familiar
with Analog Devices processors. This manual assumes that the audience
has a working knowledge of the appropriate processor architecture,
instruction set, and C/C++ programming languages.
Programmers who are unfamiliar with Analog Devices processors can use
this manual, but should supplement it with other texts (such as the
ADSP-BF70x B Processor Hardware Reference
and the
ADSP-BF70x B Processor Programming Reference
) that describe
your target architecture.
