manualshive.com logo in svg

Analog Devices ADSP-BF561 EZ-KIT Lite, Руководство пользователя

Поделиться
Скачать
Analog Devices ADSP-BF561 EZ-KIT Lite Скачать руководство пользователя страница 16

Product Information

xvi

ADSP-BF561 EZ-KIT Lite Evaluation System Manual

Registration:

Visit 

www.myanalog.com

 to sign up. Click 

Register

 to use MyAnalog.com. 

Registration takes about five minutes and serves as means for you to select 
the information you want to receive.

If you are already a registered user, just log on. Your user name is your 
e-mail address. 

Processor Product Information

For information on embedded processors and DSPs, visit our Web site at 

www.analog.com/processors

, which provides access to technical publica-

tions, data sheets, application notes, product overviews, and product 
announcements. 

You may also obtain additional information about Analog Devices and its 
products in any of the following ways.

• E-mail questions or requests for information to 

[email protected]

• Fax questions or requests for information to

1-781-461-3010

 (North America)

+49 (89) 76 903-557

 (Europe)

• Access the FTP Web site at

ftp ftp.analog.com

 or 

ftp 137.71.23.21

 

ftp://ftp.analog.com

Related Documents

For information on product related development software, see the follow-
ing publications.

Содержание ADSP-BF561 EZ-KIT Lite
































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды