manualshive.com logo in svg

Analog Devices ADSP-21992 EZ-KIT LITE, Системное руководство, Страница: 39 / 87

Поделиться
Скачать
Analog Devices ADSP-21992 EZ-KIT LITE Скачать руководство пользователя страница 39

ADSP-21992 EZ-KIT Lite Evaluation System Manual

2-1 

2 USING THE EZ-KIT LITE

This chapter provides specific information to assist you with developing 
programs for the ADSP-21992 EZ-KIT Lite evaluation board. The fol-
lowing sections are provided.

•

“EZ-KIT Lite License Restrictions” on page 2-2

Describes the restrictions of the EZ-KIT Lite demo license.

•

“Restricted Software Breakpoints” on page 2-2

Provides information about the example programs included in the 

ADSP-21992 EZ-KIT Lite evaluation system.

•

“Memory Map” on page 2-3

Defines the memory map to assist in developing programs for the 

EZ-KIT Lite evaluation system.

•

“Using Programmable Flag Pins” on page 2-5

Describes the function and use of the programmable flag pins on 

the EZ-KIT Lite evaluation system.

•

“Example Programs” on page 2-6

Provides information about the example programs included in the 

ADSP-21992 EZ-KIT Lite evaluation system.

•

“Using Flash Programmer Utility” on page 2-6

Allows you to program flash memory.

Содержание ADSP-21992 EZ-KIT LITE
























































































Отзывы:

Нет отзывов