Analog Devices ADSP-2181, Руководство пользователя

Страница: 36 / 70

Using EZ-KIT Lite Vi+ Interface
2-12 ADSP-2181 EZ-KIT Lite Evaluation System Manual
7. Click OK to return to the Session List . Highlight the new session
and click Activate .
8. A message appears instructing you to press the Reset button. Click
OK and press the reset button on the board.
All the LEDs light up after a brief delay (less than 2 seconds).
FL1
will then blink and the
PWR
LED will stay lit. During the delay, the
POST
tests run to verify the correct operation of the AD1847 codec
and the EPROM.
9. Click OK
The initialization completes and the disassembly window opens.
The code in the disassembly window is the EZ-KIT Lite monitor
program.
Figure 2-1. New Session Dialog Box