Analog Devices ADSP-21479 EZ-Board Скачать руководство пользователя страница 32

Страница: 32 / 113

Vi+ Evaluation License

1-12

ADSP-21479 EZ-Board Evaluation System Manual

not activated, it allows 10 days of unrestricted use and then becomes dis-
abled. The license can be re-enabled by activation.

An evaluation license can be upgraded to a full license. Licenses can be
purchased from:

• Analog Devices directly. Call (800) 262-5645 or 781-937-2384 or

go to:

http://www.analog.com/en/content/buy_online/fca.html

• Analog Devices, Inc. local sales office or authorized distributor. To

locate one, go to:

http://www.analog.com/salesdir/continent.asp



The EZ-Board hardware must be connected and powered up to use
CCES with a valid evaluation or full license.

Vi+ Evaluation License

The ADSP-21479 EZ-Board installation is part of the Vi+ . The
EZ-Board is a licensed product that offers an unrestricted evaluation
license for the first 90 days. Once the initial unrestricted 90-day evalua-
tion license expires:

• Vi+ restricts a connection to the ADSP-21479 EZ-Board

via the USB port of the standalone debug agent interface only.
Connections to simulators and emulation products are no longer
allowed.

• The linker restricts a user program to 27306 PM words for code

space with no restrictions for data space.

• The EZ-Board hardware must be connected and powered up to use

Vi+ with a valid evaluation or permanent license.

Содержание ADSP-21479 EZ-Board


















































































































Результаты поиска

Содержание ADSP-21479 EZ-Board

Отзывы:

Похожие инструкции для ADSP-21479 EZ-Board

Бренды по названию

Популярные бренды

Analog Devices ADSP-21479 EZ-Board, Руководство пользователя

Результаты поиска

Содержание ADSP-21479 EZ-Board

Отзывы:

Похожие инструкции для ADSP-21479 EZ-Board

Бренды по названию

Популярные бренды