ADSP-21160 EZ-KIT Lite Evaluation System Manual
1-3
Using ADSP-21160 EZ-KIT Lite
• Universal 7V DC power supply
• USB 2.0 cable
If any item is missing, contact the vendor where you purchased your
EZ-KIT Lite or contact Analog Devices, Inc.
Default Configuration
The ADSP-21160 EZ-KIT Lite board is designed to run outside your per-
sonal computer as a stand-alone unit. You do not have to open your
computer case.
To connect the EZ-KIT Lite board:
1. Remove the EZ-KIT Lite board from the package. Be careful when
handling the board to avoid the discharge of static electricity,
which may damage some components.
2.
shows the default jumper and switches settings, connec-
tor locations, and LEDs used in installation. Confirm that your
board is set up in the default configuration before moving to the
next step.
The EZ-KIT Lite evaluation system contains ESD (electrostatic discharge)
sensitive devices. Electrostatic charges readily accumulate on the human
body and equipment and can discharge without detection. Permanent dam-
age may occur on devices subjected to high-energy discharges. Proper ESD
precautions are recommended to avoid performance degradation or loss of
functionality. Store unused EZ-KIT Lite boards in the protective shipping
package.
www.BDTIC.com/ADI
