10
Figure 14 Alarm band lines and Alarm Status form (overlay) shown in an example vibration measurement. X-axis
alarm is disabled.
Data Capture
The user can configure where the files to be stored and reset the file count. To set the Data
Capture options, open the Data Capture Configuration dialog window by selecting “Data Capture”
on the top bar of the Evaluation Software window and then the “Data Capture Configuration”
window will open. A file location and name can be set. Press OK when done with configuration.
Note: Data logging can be enabled by checking the “Enable Data Log” box on the Main Form.
The File Number will increment to show how many files have been written. The Default path for
data files is My Documents. The default data file name is Datalog.csv. The file name is appended
with the file count number. Datalog_001.csv, Datalog_002.csv. The path and name of files can
be changed in the Data Capture Configuration Form. File Access is “overwrite.”
Figure 15 Data Capture Configuration Window
