One Technology Way · P.O. Box 9106 · Norwood, MA 02062-9106 · Tel: 781.329.4700 · Fax: 781.461.3113 ·
Rev 21 Feb 2014 12:08 | Page 1
AD-FMCMOTCON1-EBZ Linux on Zynq Quick
Start Guide
This guide provides some quick instructions (still takes awhile to download, and set things up) on how
to setup the AD-FMCMOTCON1-EBZ on either:
●
Requirements
You need a Host PC (Windows or Linux).
●
You need a SD card writer connected to above PC (Supported USB SD readers/writers are OK).
●
USB keyboard/mouse for the Zynq Device
●
HDMI Display (monitor or TV)
●
Creating the SD Card
Create SD Image for Zynq Boards
Adding the AD-FMCMOTCON1-EBZ bootfiles
On the boot partition on the SD card, the boot.bin and devicetree.dtb specific to the motor control
project must be copied. They can be downloaded from:
Connecting the hardware together
Instruction regarding the hardware connection can be found at:
