ANADOLU ISUZU CITIPORT E6 2019, Руководство пользователя

Страница: 14 / 97

14
STARTING THE ENGINE
Bring main switch to “ON” and the transmission to “N” position. By bringing the ignition
switch to “M” position, turn it and press the starter button (“D” position).
Do not run the starter more than 30 seconds and do not press the
accelerator pedal while operating. Wait two minutes between every attempt
to run.
If the engine oil warning light does not turn off in 15 seconds, stop the engine
in order to prevent the harm of it. Apply to the authorized service.
After starting the engine, run at idle for 3-5 minutes, increase the engine
speed slowly. Do not run the engine over maximum speed, this may cause
serious damages to the engine.
Starting The Engine In Cold Weathers
Bring main switch to “ON” and the transmission to “N” position. By bringing the ignition
switch to “M” position, when the glow light turns off, turn the ignition switch (“D” position)
and press the starter button.
If the vehicle would stay in parking for a long time (more than 1 days), bring the
main switch to off position .
STOPPING THE ENGINE
Stop the engine by bringing the ignition switch to “St” position.
Do not close the main switch before 70 seconds when the ignition switch
is on and after it is off.