Gs200
- OWNER’S MANUAL
14
15
9.
PARK BRAKE
Your scooter is equipped with an electromagnetic park brake on the base
toward the back.
1. To use your scooter, the lever must be engaged
in the Drive position “
D
”.
2. To move your scooter without using battery
power, disengage the lever in the neutral
position “
N
”.
3. Once in the “
N
” position, push the scooter
slowly. Pushing too quickly will activate a
slowing mechanism and will make it difficult
to push.
!
WARNING
• Do not sit on the scooter if the brake lever is in the “
N
” or neutral position.
• Always ensure the brake lever is in the “
D
” position before inserting the key
to use scooter.
• Never disengage the brake lever while driving.
10.
REUSE BY THIRD PARTIES
If you transfer your scooter to a new user, please remember also to hand over all
the technical documentation needed to ensure safe operation. In accordance with
specifications, the
Gs200 Scooter
must first be inspected, cleaned and returned to pristine
condition by the provider or health care professional.
8.
SEAT ADJUSTMENT
1. To recline, pull the lever
upward and push back on
the seat. Let go of the lever at
the desired recline. To bring
the backrest back up, pull the
lever upward and remove
pressure from the backrest.
Chairback will come up. Let
go of the lever at the desired
adjustment.
2. The seat can be rotated
360° and locked at any
45-degree increment
position. To adjust, push
down the lever below the
seat and rotate the seat to
the desired position. Release
the lever to lock the seat in
any 45-degree position.
Rotate side to side until it is
locked.
3. To adjust the width between
the armrests, turn the knob
below the backrest to the left
or right. Be sure to tighten the
knob afterwards to secure
the armrests into position.
4. To adjust the height of the
armrest, turn the adjustment knob until the desired height
is reached.
5. To adjust the angle of the armrest, turn the screw located at the back outside of the
armrest until you reach the desired angle.
1
2
4
3
5
