User Manual - VPX-1701
10
Rear Panel Description
No.
Name
Description
1
AC
Connect the power cord provided. Accepts AC power of 100-240V 50/60Hz.
2
VGA IN
VGA IN (1-2): Connect to VGA sources.
AUDIO IN (1-2): Connect to audio devices for audio input, embedded with the VGA sources.
3
HDMI IN (3-7)
Connect to HDMI sources.
4
HDMI OUT
Connect to an HDMI display.
5
AUDIO OUT
Connect to an audio receiver for HDMI audio de-embedding output.
6
HDBT OUT
Connect to an HDBT receiver via a Cat 5e/6/7 cable. The port mirrors to HDMI OUT.
7
HOST
Connect to the USB Host device, such as a PC.
8
RS-232 & IR
Connector
Connect to an RS232-enabled device and an IR device.
9
LAN 10/100
Connect to an Ethernet device.
10
RESET
When the VPX-1701 is powered on, use a pointed stylus to hold down the RESET button for three or
more seconds, and then release it. It will reboot and restore to its factory defaults.
11
CONTACT IN
Connect pins 1-4, 5-7 and
to a remote controller for switching among VGA and HDMI inputs.
1-2: Select VGA IN 1-2.
3-7: Select HDMI IN 3-7.
: Connect to Ground.
12
TALLY OUT
Connect pins 1-4, 5-7 and
to a status display device such as LEDs to indicate which source is
currently selected.
1-2: Positive signal means VGA IN 1/2 is selected.
3-7: Positive signal means HDMI IN 3/4/5/6/7 is selected.
: Connect to Ground.