AMX vision2 V8.4 Скачать руководство пользователя

Страница: 79 / 92

Producer Service

Vision

Instruction Manual

NOTE: If configuring a firewall on a Vision2 server, incoming multicasts must be permitted.

Setting Up an Intermission

If there is no content scheduled for a certain period of time, Producer enables setting an intermission source which automatically

plays:



MPEG-2 or MPEG 4 h264 file from a Vision

archive.



Multicast MPEG-2 source such as a DVB or Live MPEG channel.



Unmanaged Live channels are also available for Intermission as well.

Perform these steps to set up an intermission:
1.

Set the File or Live Feed options to indicate whether the intermission source is from a file or live feed. After making your

selection, do one of the following:



File: Select an Archive using the Content drop down menu. Select a file using the Name drop down.



Live Feed: Select a live channel from the Live drop down menu.

Click Apply.

Set the Enable Intermission setting to ON in the Intermission section and click Apply.

Set the Stream Enable setting to ON to activate the Producer.

The Name and URL text boxes populate with the name and path of the intermission source. This source will play if there is no

scheduled content.

Viewing the Stream

Enable the Stream and click the Watch icon. Some content must be scheduled or an intermission source enabled, otherwise nothing

will be seen.

Port

The multicast port for the channel.

TTL

The multicast TTL for this channel. Enter a value in the space provided.

NIC

The IP address of the network to use for multicasting.

Intermission

This section defines what to do if there are no videos scheduled to broadcast. Users can schedule a specific MPEG-2

file from a Vision

archive or a multicast MPEG-2 source such as a DVB or Live MPEG channel.

Intermission Enable

Use this setting to enable/disable the Intermission. If the Intermission is not

enabled and nothing is scheduled, the user sees a blank screen.

Source

Defines whether to use a file playing in a loop or a live feed during Intermissions

between scheduled content.

Live (Live Feed only)

Select the live channel from the available list. This option only appears if you select

Live Feed for your source.

Content (File only)

The Archive which is to be used as the source of the videos to be scheduled.

Name (File only)

Select the file matching the format and bitrate selected to use as the intermission

source.

URL

This value is read only and shows the path to the file or Live Channel as

appropriate.

Configure Options

Содержание vision2 V8.4





























































































Результаты поиска

Содержание vision2 V8.4

Отзывы:

Похожие инструкции для vision2 V8.4

Бренды по названию

Популярные бренды

AMX vision2 V8.4, Инструкция по эксплуатации

Результаты поиска

Содержание vision2 V8.4

Отзывы:

Похожие инструкции для vision2 V8.4

Бренды по названию

Популярные бренды