AMX Vision 2, Руководство по эксплуатации/справочник

Страница: 63 / 128

Master Service
53 Vision
2
Operation/Reference Guide
Adding and Activating Services
After successfully adding a server, you must activate the available services for it with an appropriate license
key. Perform these steps to add and activate a service:
1.
Click Manage <name of server > in the services list on the left side of the page to display the available
services for the server.
2.
Enter a valid license code in the New Service License Code field.
3.
Click Check License Code . If the code is valid, the License Changes area displays the number of
licenses available for each type of service.
4.
Click Apply updated License to apply the license code and create the requested services. The new
services populate the Current Status of Services list at the top of the page.
5.
Select an inactive service from the Current Status of Services list. Inactive services appear highlighted in
green in the list and have a value of False in the Activated column.
6.
Click Activate Service so you can manage the service. Repeat steps 5 and 6 to activate any remaining
inactive services.
Changing the Channel Order
The Manage Channel Order page enables you to change the order in which live channels are listed in the user
interfaces.
Each server or Live appliance has its own license code. If you have more than one
server or appliance, you must apply a license code to each unit.
FIG. 52 Manage Channel Order
Be sure to dismiss any pop-ups that appear before you save your changes and
navigate to a different screen. Failure to do so can cause an interface error requiring
you to refresh your browser.