AMX Vision 2, Руководство по эксплуатации/справочник

Страница: 122 / 128

Producer Service
112 Vision
2
Operation/Reference Guide
The following options are available on the top toolbar:

To move a program within the schedule, simply drag-and-drop it into the new location. If you
attempt to drop it into a location where it will not fit (due to other programs) then it will return to its
original location.

To schedule a new program, drag it from the content menu on the left and onto the schedule.
Viewing the Stream
The Vision
2
Services manager provides a menu option which allows you to view the stream without having to
open a user player. Simply click the View Stream option in the menu for the service. You must have selected
Stream Enable on the configuration page to start the service, and either have scheduled some content or
enabled the Gap file before you can view the stream.
Edit Schedule Options
Snap When moving a program or adding a program to the schedule, the Snap limit
defines the program time start boundary. For example, a 15 minute Snap
setting only allows programs to be scheduled at :00, :15, :30, and :45 minutes
past each hour.
Copy The copy option enables you to copy individual programs, days, or entire
weeks from one part of the schedule to another.
Delete The delete option enables you to delete individual programs, days, or entire
weeks from the schedule.
Save To update the schedule on the server, click Save . Any changes will
immediately take effect.
Show Program Info When you select a program already in the schedule or one from the content
menu, you can see the same program information that is available in the
archive.