Firmware Upgrades
83
AMX TDS (Television Delivery System)
Firmware Upgrades
Overview
This section describes performing firmware upgrades on the DTV-MA01, as well as on DTV Transmitters and
Receivers.
Upgrading Firmware On the DTV-MA01
The following instructions describe upgrading the device firmware on DTV-MA01 TDS Management
Appliance.
Before attempting to upgrade the firmware, you must have the latest
AMX-TDS.JAR
Module file.
Check
www.amx.com
for the latest device firmware files.
1.
Connect a USB Keyboard and mouse to any two USB Ports on the unit (USB Ports are available on both
the front and rear panels - see FIG. 92).
2.
Connect a monitor to the SVGA (or HDMI) Video Output on the rear panel.
3.
Plug in the provided power cable.
4.
Press the Power Switch on the front panel to power the unit on (FIG. 93).
5.
When the unit is fully booted up, click on the Knopflerfish desktop UI and select the
AMX-TDS
bundle
FIG. 92
DTV-MA01 (rear panel)
Connect a VGA Monitor
Connect USB Keyboard
Connect USB Mouse
Connect Power Cable
By default, the DTV-MA01 recognizes all USB keyboards as UK-Style Keyboards.
There are subtle differences in the key layouts between UK and US keyboards.
Therefore, if you are using a US style keyboard to enter data, verify that you are
getting the expected results as you type. This should not be an issue if you are only
entering basic login credentials and IP address information.
FIG. 93
DTV-MA01 (front panel)
Power Switch
Содержание TDS
