AMX TDS, Руководство по эксплуатации/справочник

Страница: 56 / 106

AMX TDS Installation Overview
48 AMX TDS (Television Delivery System)
5.
Once the unit is powered up, you will be logged in automatically, using the default User Name and
Password:

Default User Name : " amxdtv "

Default Password : " admin " ( case-sensitive )
6.
Either via the Control Panel (Network Connections) or a Terminal session, set a static TCP/IP Address for
the DTV-MA01 (make a note of the address, you’ll need it in the next step).
2) Access the TDS Configuration Pages
1.
Power-up the DTV-MA01.
2.
On any PC that has access to the LAN to which the DTV-MA01 is connected, open a web browser and
enter the following default URL to access the TDS Configuration Pages (on the DTV-MA01):
http://<IP Address assigned to the DTV-MA01>:8080/TDS/web/TxNetworkPage.xml
3.
Press enter to be prompted for the default User Name and Password for the DTV-MA01:

Default User Name : " amxdtv "

Default Password : " admin " ( case-sensitive )
4.
Press OK to proceed to the built-in Web Console called the "Digital TV Configuration Manager".
The Digital TV Configuration Manager allows you to configure the Receiver and all Transmitters in the TDS
solution via a web browser on any PC that has access to the LAN to which the DTV-MA01 is connected.
Refer to the Digital TV Configuration Manager section on page 53 for information on each of the
Configuration Pages.
3) Configure the NetLinx Master for AMX TDS
While it is not a requirement of the TDS System, many installations utilize a NetLinx Master (in conjunction
with one or more touch panels) for system control.
By utilizing the NetLinx AMX TDS Module (available to download from www.amx.com) on the Master, the
TDS Transmitters and Receivers can interface with NetLinx code to perform various functions (such as
controlling screens via Serial) which can't be done through the web pages described in this document.
In order to use a NetLinx Master with the TDS system, two steps must be taken to prepare the Master (both
require the
NetLinx Studio application):
1.
The AMX TDS Duet Module (.JAR file) must be loaded on the Master.
2.
The Master’s Source Code file must be modified slightly and reloaded to the Master.
FIG. 69 DTV-MA01 (front panel)
Power Switch
If your Network Administrator does not allow static TCP/IP addressing, they will have
to setup the DHCP server to always give the DTV-MA01 the same IP address.
The User Name and Password can be changed via options in the System Setup page
(in the Digital TV Configuration Manager). See the System Setup Page
section on
page 75 for details.