AMX NXA-PDU-1508-08, Руководство по эксплуатации/справочник

Страница: 5 / 20

NXA-PDU-1508-8
1 NXA-PDU-1508-8 Power Distribution Unit (240V / 10A)
NXA-PDU-1508-8
Overview
The NXA-PDU-1508-8 Power Distribution Unit - 240V / 10A (FG673-02) provides switching of mains power
to each of eight AC power outlets. The two built-in AxLink bus strips provide connectivity (AxLink data /
power) for up to eight AxLink connections.
Features

Supplies, controls, and monitors power to other electronics, to allow power staging and monitoring
as well as management of standby power consumption.

Measures current on each power outlet, as well as the total current draw of the entire PDU.

The AxLink bus strip power line is divided into two banks of four connectors each (“Bank 1” and
“Bank 2”), with power switched separately to the two banks.
Product Specifications
FIG. 1
NXA-PDU-1508-8
NXA-PDU-1508-8 (240V) Specifications
Power
Specifications: • Powered via 240VAC, 50/60Hz mains power on an IEC-320 C-14 connector.
• Required voltage = 240VAC, 50/60Hz
• Total Combined Current (including AxLink): 10A
• Idle current draw (240VAC 50/60HZ): 0.5W max
Front Panel Components:
POWER LEDs
(1-8): Eight green LEDs illuminate to indicate that the associated Power Outlet (#1 - #8) is in
use.
AXLINK LEDs: Two green LEDs illuminate to indicate when the associated AxLink Bus Strips (Bank 1 or
Bank 2) on the PDU is in use.
STATUS LED: Yellow LED illuminates to indicate AxLink communication activity between the PDU and
the NetLinx Master:
• ON - power, no master connection
• OFF - no power
• Blink - powered, communicating with master
RESET pushbutton
AxLink STATUS LED
AxLink BANK 1
POWER (Output 1-8 Status) LEDs
Status LED
AxLink BANK 2
Status LED
Power Inlet
Fuse Compartment
AXLINK POWER Connectors BANK 1 (1-4)
MASTER AxLink Connector (to NetLinx Master Controller)
TEMP (RTS) Input Connector
Power Outlets 1-8
AXLINK POWER Connectors BANK 2 (5-8)
CONFIG DIP Switch
8 7 6 5 4 3 2 1