AMX NMX-MM-1000 Скачать руководство пользователя

Страница: 17 / 83

Installation

Administrators Guide - NMX-MM-1000 Enzo Meeting Presentation System

Installation

Overview

Installing the NMX-MM-1000 is a quick and simple process. Before connecting the NMX-MM-1000 to its peripheral devices and

powering the device, be sure to mount the device using the desired method detailed below.

Installation

The NMX-MM-1000 can be mounted using an AVB-VSTYLE-RMK-1U V-Style Box Tray (

FG1010-720/721

). Consult the

Mounting

Options for V Style Modules Quick Start Guide

included with the kit for mounting instructions.

The Enzo also has rubber feet that can be applied to the bottom of the unit for table-top mounting.

Mounting with an NMX-VRK V-Style Rack Shelf

Enzo can be mounted in a rack by using an NMX-VRK V-Style Rack Shelf (

FG3201-60

). In addition to the Enzo, the PoE injector

module can be mounted on the rack shelf using cable ties to secure it to the provided tie down holes.

Perform these steps to mount the encoder using the NMX-VRK V-Style Rack Shelf:
1.

Invert the Enzo and the rack shelf for ease of installation.

Attach the rack shelf to the bottom of the Enzo using the #4-40 3/16 inch undercut flat head screws (provided). Insert the

screws through the underside of the rack shelf and into the holes on the bottom of the Enzo. Note that only two screws are

required.

Install the rack shelf in a standard EIA 19 in. (48.26 cm) rack and secure with rack-mounting screws.

(This step is optional.) Attach fill plates using the #4-40 3/16 inch undercut flat head screws (provided). Be sure to use the

screw holes closest to the front of the tray.

Use wire ties (not provided) to mount the PoE injector to the rear section of the rack shelf. This step is optional.

FIG. 8

NMX-VRK V-Style Rack Shelf

Содержание NMX-MM-1000




















































































Результаты поиска

Содержание NMX-MM-1000

Отзывы:

Похожие инструкции для NMX-MM-1000

Бренды по названию

Популярные бренды

AMX NMX-MM-1000, Руководство администратора

Результаты поиска

Содержание NMX-MM-1000

Отзывы:

Похожие инструкции для NMX-MM-1000

Бренды по названию

Популярные бренды