Installation Guide
MVP-9000i
Modero Wireless Touch Panel with Intercom
Overview
The AMX MVP-9000i-XX Modero Wireless Touch Panel is a mobile device that
communicates with a NetLinx Master via a standard 802.11a/b/g Wireless
Access Point. Panel to panel communication is enabled via a full duplex VoIP
intercom interface with SIP integration. The MVP-9000i utilizes a 9" Color Active
LCD to display a 800 x 480 pixel image using over 16.7M colors, offers control
via four programmable capacitive touch buttons and a capacitive touch
directional pad in addition to its touch screen, and features programmable
firmware that can be upgraded via the device’s mini-USB port. The MVP-9000i
comes in black (MVP-9000i-GB,
FG5967-01
) and white (MVP-9000i-GW,
FG5967-02
).
For detailed installation, configuration, programming, file transfer, and operating
instructions, refer to the
MVP-9000i Operation/Reference Guide
, available
on-line at
www.amx.com
.
Specifications
Connector Locations
With the unit facing you, the microSD card slot (for loading and saving files such
as photos), the mini-AB USB port (for programming and downloading firmware)
and the DC power jack are located on the lower left side of the device. The
connector for the Table Docking Station is located on the bottom of the device.
The MVP-9000i may be operated while docked in a Table Docking Station or
Wall Docking Station, connected via the included power supply, or through
battery power.
The MVP-9000i supports an Ethernet over USB driver for panel downloads and
firmware updates through its mini-USB port instead of through a standard
Ethernet port. The mini-USB port may also be used, with an adaptor, with USB
memory sticks and USB headphones.
Note:
The mini-USB port cannot be used to power the device or charge the
battery. Operation and charging must be done through the Docking Station
connector or through the power jack.
Warning
:
Although firmware upgrades can be done over wireless Ethernet; it is
strongly recommended that firmware KIT files be transferred over a direct USB
connection and only when the panel is connected to a power supply. If battery
FIG. 1
MVP-9000i-GB Touch Panel components
MVP-9000i Specifications (FG5967-01/02)
Dimensions (HWD): • 7.62” x 10.98” x 1.06" (19.35 cm x 27.89 cm x 2.69 cm)
Weight:
• 3.40 lbs (1.54 kg)
Power Requirement
(without charging):
• Constant current draw: 1.7 A @ 12 VDC
• Startup current draw: 1.9 A @ 12 VDC
• If panel is mounted onto a TDS or WDS, add 0.1 A to the
above figures.
Power Requirement
(while charging):
Panel while charging battery:
• Constant current draw: 3.3 A @ 12 VDC
• Startup current draw: 3.9 A @ 12 VDC
• If panel is mounted onto a TDS or WDS, add 0.1 A to the
above figures.
Minimum power
supply required:
• PS3.0 Power Supply
(FG423-30
)
• PS-POE-AT High Power PoE Injector (
FG423-81
) through
the Table Docking Station and Wall Docking Station
Power Modes:
• ON: All necessary modules are powered up and device
remains online with the Netlinx Master.
• ASLEEP: Only the backlight will be turned off after the user
selectable time of inactivity has elapsed.
Panel resumes
the ON mode in ~ 1 second.
• STANDBY: Power to all components other than the touch
screen is turned off after the user selectable time of
inactivity has elapsed. Device will turn back on by touching
the screen.
• SHUTDOWN: Power to all peripherals and components is
turned off. The system remains in this mode until it is
rebooted.
Certifications:
• FCC Class B
• CE
• IEC60950
• RoHS
• UL
• Telec - Japan approval (pending)
Docking Station interface connector
Speaker
Directional pad
Capacitive touch buttons (4)
C
C
Microphone
Mini-USB
connector
Stylus
MicroSD
card slot
DC power
jack
memory
MVP-9000i Specifications (Cont.)
Battery Duration:
• Four days of normal use (25% On state, 25% Standby, and
50% Shutdown).
• Five hours of continuous use (continuous On state).
Memory:
• 2GB internal microSD (1.5GB accessible to user)
Screen Properties:
• Screen resolution: 800 x 480 pixels (HV) @ 60 Hz refresh
rate
• Aspect ratio: 16 x 9
• Brightness (luminance): 400 cd/m2
• Channel transparency: 8-bit Alpha blending
• Contrast ratio: 900:1 max.
• Display colors: 16.7M colors (8-bit color depth)
• Dot/pixel pitch: 0.246 mm
• Panel type: TFT Color Active-Matrix
Active Screen Area: • 7.75” x 7.40” (196.80 mm x 188.08 mm)
• 9" diagonal)
Viewing Angle:
• Up/Down/Left/Right: 85/85/85/85
Audio:
• Mono speaker: 4 Ohm, 2 Watts 300Hz cutoff frequency
Infrared
Communication:
• IR Transmit only, including AMX 38KHz, AMX 455KHz, and
3rd party IR.
Operating/Storage
Environments:
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 20% - 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH
Included
Accessories
• PS4.4 Power Supply
(FG423-45
)
• Stylus (pre-installed onto the left side of the unit)
Other AMX
Equipment:
• MVP-TDS-9-GB Black Table Docking Station
(FG5967-10
)
• MVP-TDS-9-GW White Table Docking Station (
FG5967-11
)
• MVP-WDS-9-GB Black Wall Docking Station (
FG5967-12
)
• MVP-WDS-9-GW White Wall Docking Station (
FG5967-13
)
• CC-MINIUSB Mini USB to PC Cable Adapter (
FG5967-20
)
• MVP-BP-9 Replacement Battery Pack (
FG5967-21
)
• PS-POE-AT High Power PoE Injector (
FG423-81
)
FIG. 2
MVP-9000i-GW Kickstand View, showing connector locations
Mini-USB port
DC power jack
Stylus
Kickstand
MiicroSD
card slot
memory
