Quick Start Guide
Mio Modero
®
Prestige
Keypad
Overview
The Mio Modero Prestige (
FG5798-01xx
, single style;
FG5798-02xx
, double style; xx
indicates color selection) provides a wide range of control capabilities in the form of
keypads that are as adept as they are elegant. Each device is available as single style
(8 button max) or double style (16 button max).
You need KeypadBuilder to properly program these devices. The application and
documentation are available from
www.amx.com
.
Specifications
The Mio Modero device family keypad specifications are as follows:
Available Color Schemes
The Mio Modero device family is available in a range of colors. The Prestige supports
these color schemes, Black (BL), White (WH), and Beige (BG).
Installation
Note:
Before touching the device, discharge the static electricity from your body by
touching a grounded metal object.
The basic front and rear components of the Mio Modero are as follows:
Changing Buttons
The Mio Modero Prestige ships with sheets of common menu items and icons for
creating inserts for single and double buttons.
1.
If connected, disconnect the power supply.
2.
Place a flathead screwdriver in the notch at the bottom right of the Mio Modero,
and pry the faceplate from the mounting frame.
3.
On the back of the faceplate locate the button access points, outlined with white
circles. Using a straightened paperclip, poke through the button access points
until the buttons pop free.
4.
The Prestige buttons are comprised of three parts, the frame, window, and back
insert. From the front of the button, use your thumb to poke the window and back
insert out of the frame. See FIG. 3.
5.
Snap the widow into the frame and then place the printed labels inside each
button.
6.
Snap the back inset to the window and frame.
7.
Insert the buttons into their proper location on the faceplate.
8.
If the power supply was disconnected in
Step 1
, reconnect and return power to
the device.
9.
Snap the faceplate on the mounting frame.
Be certain to reprogram the Mio Modero to match the new button arrangement; use
KeypadBuilder to assign the locations. See the
KeypadBuilder Instruction Manual
available at
www.amx.com
.
FIG. 1
Mio Modero Prestige
Specifications
Power:
12 vDC, 70 - 230 mA (range depending on device type and number of
buttons)
Front Panel
Components:
• Pushbuttons - a maximum of 8 buttons on the single style and 16
buttons on the double style, with a direct LED light.
Rear Panel
Components:
• DIP switch - 8 position mini DIP switch used to set the device address
for the keypad on the AXlink Bus.
• Wiring connection - 4 pin 3.5mm Phoenix AXlink connector.
Dimensions
(HWD):
• Single style - 4.46" x 2.71" x .57" (113.28 mm x 68.83 mm x 14.48 mm)
• Double style - 4.46" x 4.39" x .57" (113.28 mm x 111.51 mm x 14.48
mm)
Weight
(range):
.25 lbs (.11 kg) - .50 lbs (.23 kg) Style and number of buttons will decide
weight.
Operating
Environment:
• Operating Temperature: 0° to 50° C (32° to 122° F)
• Storage Temperature: -10° to 70° C (14° to 158° F)
Mounting:
Mounts into US and a majority of International single gang back boxes.
Included
Accessories:
• Single style mounting kit (KA-5795-01)
• Double style mounting kit (KA-5795-02)
• Mylar kit - Sheets of common menu items and icons for creating inserts
for single and double buttons.
Available in either black, white, or beige.
91-5798-01WH = White
91-5798-01BG = Beige
91-5798-01BL = Black)
• Phoenix Connector (41-5045)
Optional
Accessories:
• Accent Frame (for some larger wallboxes):
Prestige Colors
(xx indicates color selection) -
FG5795-08xx (single button); FG5795-09xx (double button)
• Custom buttons:
Prestige Colors
(xx indicates color selection) - FG5798-05xx (4
single buttons); FG5798-06xx (2 double buttons)
Mounting Frame
Face Plate
Capped Buttons
FIG. 2
Mio Modero Front and Rear Components
FIG. 3
Prestige Button Components
AXlink
3.5 mini Phoenix
connector
Notch to pry
faceplate free
(Rear Single)
8 position mini
DIP switch
Screw
holes
Screw
holes
AXlink
3.5 mini Phoenix
connector
8 position mini
DIP switch
(Rear Double)
Notch to pry
faceplate free
LED
Prestige
Button
Button
Window
(Front Single)
PWR+
PWR+
Frame
Window
Printed
Label
Back Insert
