4K60 HDMI Input & Output Boards
81
Enova Digital Media Switchers - Hardware Reference Manual
4K60 HDMI Input & Output Boards
Overview
This chapter pertains to Enova DGX 4K60 HDMI Input and Output Boards:
4k60 HDMI Input Board (FG1061-542)
4k60 HDMI Output Board (FG1061-552)
Signal Routing
DGX 4K60 HDMI Input Boards route signals to DGX 4K60 HDMI Output Boards or to any other type of Enova DGX Output
Boards. 4K60 HDMI Output Boards can also accept signals from all of the other types of Enova DGX Boards.
IMPORTANT:
In contrast to other Enova DGX output points, DGX 4K60 HDMI Boards DO NOT utilize SmartScale
®
technology. Therefore, the use of DGX 4K60 HDMI Output Boards requires the use of 3rd party equipment with matching
video capabilities. Refer to 3rd Party Equipment Requirements for DGX 4K60 HDMI Boards
for details.
The HDMI connectors are designed to route high-resolution HDMI or DVI signals with or without HDCP (High-bandwidth
Digital Content Protection). DVI signals must be single link DVI-D and require the use of a cable adapter. Destinations with
DVI-I or single-link DVI-D connectors are supported.
DGX Board Compatibility
DGX 4K60 HDMI Input Boards work in conjunction with Audio Switching Boards (see page 164), Dante Audio Switching
Boards (see page 150), or AIE Boards (see page 175).
NOTE:
AIE compatibility with DGX 4K60 HDMI Boards is limited to a single direction on each type of card (i.e, input cards
only support extraction to AIE; Output cards only support insertion from AIE).
Signals through 4K60 HDMI Boards in the DGX Switcher produce a quality image and provide support for the most flexible
audio settings (because the HDMI ports are pre-loaded with the most common EDID settings). However, changes to EDID
or scaling settings can be made via the System Configuration interface (see page 184).
FIG. 38
Enova DGX 4K60 HDMI Input and Output Boards
Enova DGX Enclosure Support for 4K60 HDMI Input & Output Boards
DGX 800
Holds up to four 4K60 HDMI Boards with four inputs or outputs per board. Each DGX 800 holds a maximum of two input and
two output boards, accommodating connector configurations up to a maximum of 8x8, as well as three subsets (i.e., 4x4,
4x8, or 8x4).
DGX 1600
Holds up to eight 4K60 HDMI Boards with four inputs or outputs per board. Each DGX 1600 holds a maximum of four input and
four output boards, accommodating connector configurations up to a maximum of 16x16, as well as subsets (e.g., 16x8 or
4x12).
DGX 3200
Holds up to sixteen 4K60 HDMI Boards with four inputs or outputs per board. Each DGX 3200 holds a maximum of eight input
and eight output boards, accommodating connector configurations up to a maximum of 32x32, as well as subsets in
increments of four (e.g., 12x20 or 24x8).
DGX 6400
Holds up to thirty-two 4K60 HDMI Boards with four inputs or outputs per board. Each DGX 6400 holds a maximum of sixteen
input and sixteen output boards, accommodating connector configurations up to a maximum of 64x64, as well as subsets in
increments of four (e.g., 12x48 or 52x8).
Enova DGX 4K60 HDMI Boards indicate
"4K60" beside the IN or OUT label.
