System Configuration Interface
192
Enova Digital Media Switchers - Hardware Reference Manual
NOTE:
When EDID Mode/All Resolutions is selected, the Preferred EDID drop-down list includes both standard
EDIDs and Video Information Code (VIC) EDIDs (denoted by either a "p" or an "i"). For a complete list of VIC EDIDs
for your input boards see the "EDID Resolutions Supported through Local DDC" section of the applicable board
chapter.
Inputs Only - HDCP Setting
Outputs Only - General
NOTE:
The scaler may not support all of the Display Supported resolutions. If not, select a scaled resolution from
the larger list of DGX supported resolutions.
Setting a Manual Override for a Scaled Output
1.
Select the
Manual
button.
2.
From the Resolution drop-down list, select the resolution/refresh rate.
NOTE:
Click the Show only EDID Display Supported (DS) check box to narrow the drop-down list to show only those
resolution/refresh rate options marked DS (Display Supported).
Display Settings
FIG. 104
Video Settings - Inputs Only - General
Video Settings - Inputs Only - HDCP Setting
HDCP Compliance
Click enable/disable HDCP compliance.
When disabled, this serves to notify the source that HDCP encrypted content is not allowed so that it will not try to
send encrypted content.
For additional EDID configuration information, see page 199.
FIG. 105
Video Settings - Outputs Only - General
Video Settings - Outputs Only - General
Scaling (Mode)
Click the button for the desired Scaling mode (Auto, Manual, or Bypass).
Resolution
For outputs with a scaler - In the drop-down list, select the output resolution/refresh rate to be used by the scaler;
select the "Show only EDID Display Supported (DS)" check box if desired.
For outputs without a scaler: The resolutions shown is the resolution coming in and being passed through to the
output.
Aspect Ratio
Click either Maintain or Stretch (Zoom and Anamorphic are also available for DXLink outputs)
Save EDID
Click to save a copy of the EDID from the connected display to your PC/tablet device
FIG. 106
Display Settings
