Programming
38
AXB-TPI/3 Touch Panel Interface 3
Serial Commands (Cont.)
RESOLUTION
Set the display
output resolution
and refresh rate.
This setting is applied only if the specified resolution and refresh rate are not the same on
both touch devices, as currently selected (no overlap).
Syntax:
"RESOLUTION <horizontal size>x<vertical size>:<refresh
rate>"
Variables:
horizontal size = horizontal resolution (640, 800, or 1024)
vertical size = vertical resolution (480, 600, or 768)
refresh rate = refresh rate (56, 60, 72, 75, or 85)
Example:
SEND_COMMAND Panel,"RESOLUTION 640x480:60"
Sets the output resolution to 640 x 480 at 60 Hz.
Available refresh rates per resolution:
• 640 x 480: 60, 72, 75, 85 Hz
• 800 x 600: 56, 60, 72, 75 Hz
• 1024 x 768: 60 Hz
RESET
Cycle power on
the touch panel.
Syntax:
"RESET"
Example:
SEND_COMMAND Panel,"RESET"
Cycles the power on the touch panel. Once the firmware is downloaded, send this com-
mand to recycle power to the panel. This command prevents the user from having to phys-
ically re-cycling power on the unit.
SET CAL
Set the
calibration
variables.
Syntax:
“SET CAL <X Multiplier> <X Offset> <Y Multiplier> <Y
Offset>"
Example:
SEND_COMMAND Panel,"SET CAL 2F 3A 2B 62"
Sets the calibration values on the touch panel.
SETUP
Put the touch
panel on the
Setup page.
Syntax:
"SETUP"
Example:
SEND_COMMAND Panel,"SETUP"
Flips the touch panel to the Setup page.
VER
Returns the
current firmware
version
information.
Syntax:
"VER"
Example:
SEND_COMMAND Panel,"VER"
Returns the current version of the main firmware.
WORKING?
Verify the
communication
between the touch
panel and the
Terminal
Emulator.
Syntax:
"WORKING?"
Example:
SEND_COMMAND Panel,"WORKING?"
Response:
$SC 1,"’CPAGE72-Main Page’"
Responding touch panel turns its Main page the color white. This command verifies serial
communication. The TPI/3 must have a page named Main Page for this command to work
properly.
Содержание AXB-TPI/3
