Machine Control Solutions
Make
your work more efficient
pg. 29
2
Minor Sample Distance
Maximum distance before the data gives the software a
new heading
1 is recommended, and if you select a small value such
as .01 your screen will rotate constantly as it is getting a
new heading (direction) every .01 survey feet
3
Sample Timer
Topo point logging with timed interval
4
Path Width
Distance, left to right, from one end of the path to the
other end
Increasing this number will make the surface of the path
bigger, but can create less accuracy
5
On Grade Tolerance
Vertical tolerance when working with DIRT / elevations
6
Ignore GPS Elevation
Ignore the incoming stream of elevations below this
threshold.
7
Maximum Correction
Distance
Allowed distance to be, on earth, from original data. When
distance value is exceeded, a pop-up with appear on the
screen
8
Minimum Surface
Elevation
A filter parameter for elevation. Any value for surface
elevation less than your value that you input will be
discarded.
Table 9: Advanced Settings Options
2.10.5
Machine Control Settings
Options
Description
1
Controller Address
2
Minimum Speed
Smallest amount of speed a machine can be moving to
be allowed to receive machine control instructions
