Amulet Hotkey CoreModule MX Retention Bracket, Быстрый старт, Страница: 1 / 2

CoreModule MX Retention Bracket
Install the Retention Brackets in the MX7000
Quick Start Guide
www.amulethotkey.com QS-MX7K-0030 v1.0 June 2021
For Health and safety information, refer to the sheet LS-AHKL-0001 .
The Retention Bracket Field Replacement Unit (FRU) is an upgrade to the
CoreModule (v1.0) running firmware version 5.0.4 or later. This guide describes how
to replace the fan modules in a CoreModule with the retention brackets.
Field replacement kit
Requirements
1. Remove retention brackets from the packaging
Always use appropriate anti-static handling procedures when handling sleds,
cards and modules.
2. Power off the sled(s) connected to the CoreModule(s)
To avoid disruption, migrate any VMs from sleds before power down.
3. Remove the CoreModule(s) from the MX7000 enclosure
4. Remove the CoreModule cover screws
5. Hold catches open and remove the CoreModule cover
6. Remove the fan modules
Posidriv M2.5
Release catch
Thumb grip
2
2
1 2 +
1 2 +
LEFT
RIGHT