background image

DIATROL

®

 D SERIES

REPLACEMENT BLADDER INSTRUCTIONS

Figure 1

Figure 2

Figure 3

Figure 4

READ CAREFULLY THE REPLACEMENT 

BLADDER INSTRUCTIONS TO AVOID 

SERIOUS PERSONAL INJURY AND PROPERTY HAZARDS AND 

TO ENSURE SAFE USE AND PROPER CARE OF THIS 

PRODUCT.

EXPLOSION OR RUPTURE HAZARD. THE 

EXPANSION TANK MUST BE OPERATED SO 

THAT THE PRESSURE DOES NOT EXCEED THE MAXIMUM 

WORKING PRESSURE.

THIS PRODUCT, LIKE MOST PRODUCTS 

UNDER PRESSURE, MAY OVER TIME 

CORRODE, WEAKEN AND BURST OR EXPLODE, CAUSING 

SERIOUS OR FATAL INJURY, LEAKING OR FLOODING AND/

OR PROPERTY DAMAGE.  TO MINIMIZE RISK, A LICENSED 

PROFESSIONAL MUST INSTALL AND PERIODICALLY 

INSPECT AND SERVICE THE PRODUCT.  A DRIP PAN 

CONNECTED TO AN ADEQUATE DRAIN MUST BE INSTALLED 

IF LEAKING OR FLOODING COULD CAUSE PROPERTY 

DAMAGE.  DO NOT LOCATE IN AN AREA WHERE LEAKAGE 

OF THE TANK OR CONNECTIONS COULD CAUSE PROPERTY 

DAMAGE TO THE AREA ADJACENT TO THE APPLIANCE OR 

TO LOWER FLOORS OF THE STRUCTURE.

Installation

1. Isolate tank from system.
2. Drain water from bladder.
3. Remove air valve core (Figure 1) to bleed remaining 

air charge.

4. Remove drain plug (Figure 2).
5. Disconnect system connection.
6. Unbolt and remove system connection after 

marking flanges in order to align during reassembly  

(Figure 3).

7.  Unbolt blind flange from tank and attach suitable 

lifting equipment to lifting eye. Turn top flange 

counter clockwise to wrap bladder around itself.

8.  Push bladder flange into tank at system connection.
9.  Pull old bladder from tank.
10. Unbolt blind flange (Figure 4) from old bladder and 

remove old gasket.

NOTE:

  Inspect for shipping damage and notify freight carrier or store where purchased immediately if damage is present.  To avoid risk of personal 

injury and property damage, if the product appears to be malfunctioning or shows signs of corrosion, call a qualified professional immediately.  Current 

copies of the Product manual can be viewed at www.amtrol.com.  Use proper safety equipment when installing. 

THIS IS THE SAFETY ALERT SYMBOL. IT IS USED TO ALERT YOU TO POTENTIAL PERSONAL INJURY AND OTHER 

HAZARDS. OBEY ALL SAFETY MESSAGES THAT FOLLOW THIS SYMBOL TO REDUCE THE RISK OF PERSONAL 

INJURY AS WELL AS PROPERTY DAMAGE.

Отзывы: