background image

AIR & DIRT SEPARATORS

FOR CLOSED HYDRONIC HEATING AND CHILLED WATER SYSTEMS

INSTALLATION & OPERATION INSTRUCTIONS

Models 2-ADS through 12-ADS

READ CAREFULLY THE PRODUCT 

INSTALLATION & OPERATION INSTRUCTIONS.  

FAILURE TO FOLLOW THE INSTRUCTIONS AND WARNINGS IN THE 

MANUAL MAY RESULT IN SERIOUS OR FATAL INJURY AND/OR 

PROPERTY DAMAGE, AND WILL VOID THE PRODUCT WARRANTY.  

THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED 

PROFESSIONAL. FOLLOW ALL APPLICABLE LOCAL AND STATE 

CODES AND REGULATIONS, IN THE ABSENCE OF SUCH CODES, 

FOLLOW THE CURRENT EDITIONS OF THE NATIONAL PLUMBING 

CODE AND NATIONAL ELECTRIC CODE, AS APPLICABLE. 

EXPLOSION OR RUPTURE HAZARD.  THE TANK 

MUST BE OPERATED SO THAT THE PRESSURE 

DOES NOT EXCEED THE MAXIMUM WORKING PRESSURE.

Use only lead-free solder and flux for all sweat-

solder connections, as required by state and 

federal codes.

CALIFORNIA PROPOSITION 65 WARNING!

 This product contains a 

chemical known by the State of California to cause cancer and to cause 

birth defects or other reproductive harm. (California Installer/Contractor 

- California law requires that this notice be given to consumer/end user 

of this product.) 

For more information: www.amtrol.com/prop65.html

This Product, like most Products under pressure, 

may over time corrode, weaken and burst or 

explode, causing serious or fatal injury, leaking or flooding and/or 

property damage.  To minimize risk, a licensed professional must install 

and periodically inspect and service the Product.  A drip pan connected 

to an adequate drain must be installed if leaking or flooding could cause 

property damage.  Do not locate in an area where leakage of the tank or 

connections could cause property damage to the area adjacent to the 

appliance or to lower floors of the structure.

NOTE:

  Inspect for shipping damage and notify freight carrier or store where purchased immediately if damage is present.  To avoid risk of personal 

injury and property damage, if the product appears to be malfunctioning or shows signs of corrosion, call a qualified professional immediately.  Current 

copies of the Product manual can be viewed at www.amtrol.com.  Use proper safety equipment when installing. 

THIS IS THE SAFETY ALERT SYMBOL. IT IS USED TO ALERT YOU TO POTENTIAL PERSONAL INJURY AND OTHER 

HAZARDS. OBEY ALL SAFETY MESSAGES THAT FOLLOW THIS SYMBOL TO REDUCE THE RISK OF PERSONAL 

INJURY AS WELL AS PROPERTY DAMAGE.

Отзывы: