PREFACE
THANK YOU for purchasing the “ADAPT SYSTEM”.
“ADAPT SYSTEM” offers you the ultimate solution in Sucker Rod Control. It is a smart system
that integrates a Variable Frequency Drive and an SRP controller.
PLEASE READ THIS MANUAL THOROUGHLY
before use, and keep the manual at hand for
later reference.
WARNING
ALWAYS READ THIS MANUAL THOROUGHLY BEFORE USING THE ADAPT SYSTEM.
THIS SYSTEM CONTAINS HIGH VOLTAGE CIRCUITS THAT MAY BE FATAL
TO HUMANS. USE EXTREME CAUTION DURING INSTALLATION.
MAINTENANCE MUST BE PERFORMED BY QUALIFIED TECHNICIANS, AND
ALL POWER SOURCES MUST BE DISCONNECTED BEFORE ANY
MAINTENANCE. SUFFICIENT NOTICE MUST BE GIVEN TO THE GENERAL
OPERATORS AND WORKERS BEFORE STARTING.
•
ELECTRIC SHOCK MAY OCCUR IF THE FOLLOWING POINTS ARE NOT OBSERVED
.
(1) DO NOT OPEN THE FRONT COVER WHILE THE POWER IS ON.
(2) ALWAYS GROUND THE UNIT CASE. THE GROUNDING METHOD MUST COMPLY WITH
THE LAWS OF THE COUNTRY WHERE THE UNIT IS BEING INSTALLED
• THE UNIT MAY BE DESTROYED BEYOND REPAIR IF THE FOLLOWING POINTS ARE NOT
OBSERVED.
(1) OPERATION WITHIN THE UNIT SPECIFICATIONS.
(2) PROPER CABLE CONNECTIONS TO INPUT/OUTPUT TERMINALS.
(3) CLEANING AND ENOUGH VENTILATION TO THE UNIT INTAKE/OUTTAKE PORTS.
(4) OBSERVATION OF CAUTIONS LISTED IN THIS INSTRUCTION MANUAL.
• THERE MAY BE SOURCES OF NOISE AROUND THIS UNIT AND MOTOR DRIVEN BY THIS
UNIT. CONSIDER THE POWER SUPPLY SYSTEM, INSTALLATION PLACE AND WIRING
METHOD BEFORE INSTALLATION
INSTALL THE UNIT AWAY FROM DEVICES THAT HANDLE MINUTE SIGNALS, SUCH AS
MEDICAL EQUIPMENT IN PARTICULAR. ALSO SEPARATE THE DEVICES ELECTRICALLY,
AND TAKE SUFFICIENT NOISE MEASURES.
•TAKE SUFFICIENT SAFETY MEASURES WHEN USING THIS UNIT FOR PASSENGER
TRANSPORTATION, SUCH AS IN LIFTS (ELEVATORS).