MADE IN RUSSIA OMSK 2018
www.amtelectronics.com
AMT
INCINERATOR
NG-1
A
N
OISE
G
ATE
(N
OISE SUPPRESSOR
)
DEVICE
U
SER
'
S
M
ANUAL
Thank you for purchasing the AMT NG-1.
Please take the time to read through this manual to become acquainted with the AMT NG-1.
The device IS NOT a copy of any known device. AMT engineers used their own technical ideas and their own
approaches in solving the problem of noise suppression of the guitar signal.
INTRODUCTION
AMT NG-1 is a device to eliminate noises in the guitar signal chain.
The device is effective and easy to use.
Features:
1-
Small dimensions (Snickers-size).
2-
Minimum of controls.
The main element of control is "Threshold" knob that defines the level at which the noise suppression is On. Quick
reaction to the appearance of the guitar signal and automatic decay time control allow to eliminate harmonic
distortion and quickly switch to a "cut-off" mode when the guitar signal disappears.
3-
A choice of bypass mode: active bypass or signal's complete "cut-off".
4-
A loop for connecting FX-drive pedals, preamps, etc.
When an FX-drive pedal or a preamp is placed in the loop, the level detector of the NG-1 gets the signal directly from
the guitar and the controlled attenuator stands after the pedal or preamp output. Thus, the threshold of noise
reduction is set once and is effective for any channel of the device in the loop.
