MADE IN RUSSIA OMSK 2018
AMT
OZZULATOR
CH-2
GUITAR,
BASS
GUITAR
CHORUS
EFFECT
USER'S
MANUAL
Thank you for purchasing the AMT CH-2.
Please take the time to read through this manual to become acquainted with the AMT CH-2.
INTRODUCTION
The AMT CH-2 device implements a chorus effect and is designed to work in the chain of guitar or bass guitar signal.
Chorus is a modulation effect simulating choral (polyphonic) sound of musical instruments.
When using this effect with a guitar, there is the illusion that not one guitar sounds but several ones at a time.
The effect is realized by adding to its original signal its own copies, delayed in time by values of the order of 10-20 milliseconds,
and the value of the time shift is continuously changing.
Features:
1-
Small dimensions (Snickers-size).
2-
A choice of one of two types of chorus effects (Chorus S or Chorus x3).
3-
A wide set of the effect sound controls.
4-
100% analog direct signal in a mix with the effect signal.
5-
Active bypass.
6-
Ability to work as a part of the AMT Bricks Pedal board.
APPEARANCE, CONNECTORS AND CONTROLS
1-
IN L - Left channel Input (TS - connector, 1/4").
2-
IN_R - Right channel Input (TS - connector, 1/4").
3-
OUT L - Left channel Output (TS - connector, 1/4").
4-
OUT R - Right channel Output (TS - connector, 1/4").
5-
Button to turn on/off the effect.
6-
WIDTH - Determines how wide a modulation is produced.
7-
RATE - adjusts modulation frequency (0.1Hz ... 10Hz).
8-
MIX - sets the level of a processed signal when mixing with a direct signal.
9-
DELAY- time delay regulator.
10-
a LED indicator of modulation frequency (rate).
11-
EXT.F - LED indicator. It is being used in a work with the AMT Bricks pedal board.
