AMSTRAD fidelity SRD400 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 11

AMSTRAD fidelity SRD400 Скачать руководство пользователя страница 11

This system will also work for the Amstrad SRX200, the later version of which has 48
channels. You will have to hunt for the 12 volt supply (it’s on one of the ICs near the rear
of the receiver) but the front panel connections are very similar.

This book is NOT free!

Please send £2.95 to

SatCure
PO Box 12
Sandbach,
CW11 1XA
England

Postal order, Stamps, UK coins, Scottish pound notes or 3 dollar bills please.
Be sure to include your e-mail address so I can say thanks :o)

See our web sites at:

http://www.satcure.co.uk

(Sky Digibox only) and

http://www.netcentral.co.uk/satcure

Packed with “FAQ” information about common faults and cures for faulty satellite
receivers and decoders. Repair kits, upgrade kits, spare parts, surplus compo-
nents plus links to other satellite information sites. Also Valve (tube) Audio stuff,
Electronic Hobby kits, Dolls House & Model Railway electrical stuff, Beginners’
electronics course, Apple Mac accessories, smokers clay pipes and lots of other
information that will keep you occupied for days!

Page 11

«
...
9
10
11

Содержание fidelity SRD400












Отзывы:

Нет отзывов