manualshive.com logo in svg

Amsco Century, Руководство оператора

Поделиться
Скачать
Amsco Century Скачать руководство пользователя страница 131

10-20

129373-496

Operating Instructions

Out of Cycle Options

This function allows supervisor to reset all values to the factory-programmed
values.

Press 

DEFAULT VALUES

 on screen #51 to automatically change all cycle

values and sterilizer operating parameters back to the factory-programmed
(default) values.

10.10.3  Default Values

Pressing RETURN returns display to
screen #87.

Pressing MAIN MENU returns display
screen #1.

51

SUPERVISORY CONTROL

RETURN

MAIN

MENU

CHANGE

CHANGE

CUSTOMER NAME

ACCESS CODES

CHANGE

DISPLAY

STERILIZER ID

ACCESS CODES

DEFAULT

RS-232

VALUES

INTERFACE

This function allows supervisor to activate the access code feature and
program the separate four-digit codes which will limit usage of the sterilizer,
access to the Change Values menu, and access to the Supervisory mode.
Once the access code feature is activated, the assigned four-digit code must
be correctly entered on the touch screen before the control will advance.

Change Values Access Codes

To activate and assign access codes which prevent unauthorized entry into
the Change Values menu:

1. Press 

CHANGE ACCESS CODES

 on screen #51.

10.10.4  Change Access

Codes

51

SUPERVISORY CONTROL

RETURN

MAIN

MENU

CHANGE

CHANGE

CUSTOMER NAME

ACCESS CODES

CHANGE

DISPLAY

STERILIZER ID

ACCESS CODES

DEFAULT

RS-232

VALUES

INTERFACE

Pressing RETURN returns display to
screen #87.

Pressing MAIN MENU returns display
screen #1.

Содержание Century






























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды