TMF882X
Using the EVM Software
Demo Kit Manual
• PUBLIC
UG000495
• v4-00 • 2021-Dec-01
33
│ 20
3.3
EVM GUI "3D" Tab
Figure 18:
3D Tab
This graph shows the detected objects in all the zones (pixels) in the field of view of the sensor. As
you can see in the screenshot, the sensor detects up to two objects in each zone. Each object is
shown as a plate above the base plane. If the calculated detection confidence is high, the object plate
is fully colored. If the confidence is low, the plate becomes transparent.
In the example screenshot, the sensor sees a close target (at around 20 cm) in all zones. In addition, it
detects the ceiling above the test setup at around 250 cm. The ceiling does not reflect much light. The
confidence values for detecting the ceiling are low because of that.
You can freely rotate and zoom this graph with your mouse:
●
Click and hold the right mouse button
●
Now move the mouse around and observe how the graph is rotated
●
Use the mouse scroll well to zoom in and out
You can set the maximum distance for this graph with the spin box in the "3D" box.
