manualshive.com logo in svg

AMS AMS-CZYG008-NG, Руководство пользователя

Поделиться
Скачать
AMS AMS-CZYG008-NG Скачать руководство пользователя страница 1

1/

18

DANGER

WARNING

           WARNING: 

For Outdoor Use Only.

Installation and service must be 

performed by a qualified installer,

service agency,or the gas supplier.

IMPORTANT

SAVE THESE

INSTRUCTIONS

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flame.

3. If odor continues,leave the area

immediately.

Do not store or use gasoline,

or other flammable vapors and liquids,

in the vicinity of this or any other 

appliance.

 

This unit not for use with propane. 

Use only with Natural gas.

WARNING

!

!

Read the in

stallation, operation

and maintenance instructions

tho

roughly before installing or

servicing this equipment.

!

Installation and service must be

performed by a quali

fi

ed installer,

service agency or gas supplier.

!

!

Improper installation, adjustment,

alteration, service or maintenance can

cause injury or p

roperty damage.

The instructions shall be marked with 

directions to the installer to leave them

with the consumer and to the consumer

 to retain them for future reference.

CZYG008-NG

 Owner's Manual

FIRE OR EXPLOSION HAZARD

!

4.After leaving the area,call your gas

supplier or fire department.

Failure to follow these instructions could

result in fire or explosion,which could 

cause property damage,personal injury,

or death.

!

!

INSTALLER : Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

SKU: AMS-CZYG008-NG

Содержание AMS-CZYG008-NG



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды