AMS ALF19 Series Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 66

AMS ALF19 Series Скачать руководство пользователя страница 17

The

label feeder at a glance 17

ALF19 Series

communication with the pick-and-place machines. In addition, they have an active
pull-out of the empty label carrier (some with active rewinding for easy disposal) and a
pulley for feeding the label carrier or a suspension for label rolls.

Machine adapters can be ordered separately from the label feeders for all common
pick-and-place machines. The currently available machine adapters are listed in the
section

Machine adapters table

59 .

Note

• Machine adapters vary depending on the application.
On request, we support their development or take over the
development or production.

Labels

The label feeders of the ALF19 series transport labels from 3 x 3 mm to 19 x 21 mm.
The labels can be made of different materials such as paper or polyamide.
They can be made of non-transparent, semi-transparent or fully transparent material.

3.3 Views

3.3.1 Label Feeder

«
...
15
16
17
18
19
...
»

Содержание ALF19 Series



































































Отзывы:

Нет отзывов