2820A-XX & 2825A-XX SERIES TWO DIVER COMMUNICATOR USER MANUAL
282XA-UM
REV 5.0
29
5.5.9
PUSH-TO-TALK DOES NOT WORK
If used, check the connection to the handheld microphone. A common issue is that
the yellow banana plug is not properly seated in the PUSH-TO-TALK JACK. If the
tender is using the PANEL SPEAKER as the microphone with the PUSH-TO-TALK
BUTTON, make sure the SPEAKER SWITCH is turned on. If neither of these
solves the problem, there could be a broken wire inside the diver communicator.
Open the front panel and inspect. If that does not resolve the problem then contact
Amron further assistance.
6 DRAWINGS
The reference numbers shown on the parts identifier drawings correspond to the parts lists listed in
the parts lists section.
