MODEL 2810E USER MANUAL
2810E UM
REV 7.0
22
GENERAL MAINTENANCE
6.2
The 2810E diver communicator is designed to provide years of continuous, failure-free
service when properly used and maintained. There are a few important things that the user
can do to extend the life of their equipment
1.
Handle the diver communicator with care. Do not throw it around or drop it. Select a
work area where the communicator and wire connecting to it are out of everyone's way
so it does not get knocked over.
2.
Clean the communicator after use or when needed. If the equipment is on an extended
work program, have the tender clean the equipment during slow work periods. Rinse off
salt deposits with fresh water. Clean the diver connections with a mild vinegar and
water solution using a soft brush. Rinse off the connectors with water after cleaning.
3.
When using a rechargeable battery, the battery should be recharged after use or as
soon as possible when the BATTERY CONDITION INDICATOR starts blinking.
6.2.1
RECOMMENDED MAINTENANCE SCHEDULE
The following sections outline the recommended scheduled maintenance for the
2810E and 2810E-1.
1.
DAILY MAINTENANCE - Wipe off any accumulated salt or salt spray on the
front panel or connectors using a clean, damp cloth. Pay particular attention
to where the various front panel components attach to the panel. Inspect the
outer case for any damage.
2.
WEEKLY MAINTENANCE - Wipe off any accumulated salt or salt spray on
the front panel or connectors using a clean, damp cloth. Pay particular
attention to where the various front panel components attach to the panel.
Inspect the outer case for any damage.
Inspect the PUSH-TO-TALK BUTTON, binding posts and volume
controls for smooth operation.
Inspect the case lid O-ring for any damage and replace if necessary.
6.2.2
6 MONTH CHECK
Wipe off any accumulated salt or salt spray on the front panel or connectors using
a clean, damp cloth. Pay particular attention to where the various front panel
components attach to the panel. Inspect the outer case for any damage.
1.
Inspect the PUSH-TO-TALK BUTTON, binding posts and volume controls for
smooth operation.
2.
Inspect the case lid O-ring for any damage and replace if necessary.
3.
Inspect the front panel gasket for any damage and replace if necessary.
4.
On the 2810E - recharge the battery using the Amron 2823-603 Battery
Charger.
Содержание 2810E
