Amroad DP101R, Руководство по установке

Страница: 9 / 16

AMROAD DP101R
Install Main Unit
1. After connecting the wires and cables
properly, then screw the 4 screws (M4 -L10)
and water stoppers that come with the
package into the front panel.
2. Make sure Main Unit is attached on the wall
for waterproof.
3. Put back front cover.
4. Apply Silicon Glue around the Main Unit if
required to strengthen waterproof ability.
5. Please double check all installation
procedures again, then you may power on
the general power switch to start the
configuration procedures.
Installing Procedures
Install Main Unit
6