AmpliVox Otowave 102-C, Руководство по эксплуатации

Страница: 12 / 45

USING THE OTOWAVE
7
D-0014930-A
– Otowave 102-C Operating Manual
adapter is protected with a non-replaceable fuse. If this fails, the adapter will not operate. If a replacement
mains adapter is required, please contact Amplivox directly, or your distributor.
The mains adapter is the mains disconnect device and therefore the audiometer should be positioned such
that easy access to the mains adapter is possible.
The cradle connections are labeled to ensure correct identification and connection as follows:
SOCKET LABEL SOCKET TYPE CONNECTED PART
RJ6 socket Supplied printer *
5V 0.2A
2.5mm power jack Mains AC/DC adapter *
USB USB connector
Type B
Computer (via USB port)
For connected parts marked * , make sure to only connect the parts or accessories
supplied with the instrument or supplied by Amplivox or an Amplivox distributor. These
parts have been tested for use with the Otowave 102-C for compliance with the
standards IEC 60601-1 and IEC 60601-1-2. The use of accessories other than those
specified may compromise compliance with these standards.
4.3.3. INDICATORS
The LED indicators on the instrument cradle show the status of the mains connection and the battery charging.
ICON STATUS
LED
LED displays green when power is applied to the cradle; otherwise it will
be off. On
LED shows green when the handset is located in the cradle and its
internal battery pack is charging; it will be off when the handset is
removed. On
WARNING