manualshive.com logo in svg

Amplicon NATIONAL INSTRUMENTS PXI Express NI PXIe-1062Q, Руководство пользователя

Поделиться
Скачать
Amplicon NATIONAL INSTRUMENTS PXI Express NI PXIe-1062Q Скачать руководство пользователя страница 38

Chapter 2

Installation and Configuration

Using System Configuration and Initialization Files

The PXI Express specification allows many combinations of PXI Express 
chassis and system modules. To assist system integrators, the 
manufacturers of PXI Express chassis and system modules must document 
the capabilities of their products. The minimum documentation 
requirements are contained in 

.ini

 files, which consist of ASCII text. 

System integrators, configuration utilities, and device drivers can use these 

.ini

 files.

The capability documentation for the NI PXIe-1062Q chassis is contained 
in the 

chassis.ini

 file on the software media that comes with the 

chassis. The information in this file is combined with information about 
the system controller to create a single system initialization file called 

pxisys.ini

 (PXI System Initialization). The system controller 

manufacturer either provides a

pxisys.ini

 file for the particular chassis 

model that contains the system controller or provides a utility that can 
read an arbitrary 

chassis.ini

 file and generate the corresponding 

pxisys.ini

 file. System controllers from NI provide the 

pxisys.ini

 

file for the NI PXIe-1062Q chassis, so you should not need to use the 

chassis.ini

 file. Refer to the documentation provided with the system 

controller or to 

ni.com/support

 for more information on 

pxisys.ini

 

and 

chassis.ini

 files.

Device drivers and other utility software read the 

pxisys.ini

 file to 

obtain system information. The device drivers should have no need to 
directly read the 

chassis.ini

 file. For detailed information regarding 

initialization files, refer to the PXI Express specification at 

www.pxisa.org

.

Manual

Sales:

 

+44 (0) 1273 570 220   

Website:

 www.amplicon.com   

Email:

 [email protected]

       IT and Instrumentation for industry

 Amplicon.com

Содержание NATIONAL INSTRUMENTS PXI Express NI PXIe-1062Q















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды