Amphenol C2LINX Series, Руководство по установке

Страница: 15 / 43

15
C2LINX
Amphenol Network Solutions
All rights reserved. 04.13.20 150717 A0
509.926.6000
— amphenol-ns.com
®
4.3.2 C2LINX Rear Door
Plastic latches are located on the end of each door.
1. Pinch latches together on the doors.
2. Pivot door on the center hinge to open.
4.4 Chassis Wall Links
Chassis wall links attach the side wall of the chassis. Front and rear chassis wall links are not installed to avoid
interferences with rail racks or cabinets. Once the chassis is mounted in the rack, you may install the chassis wall
links.
Each link is marked L for left and R for right. They are installed on the appropriate side of the chassis by inserting
the bottom clips into the square notches in the plastic rails and then pushing down the top clip to lock in place.
They can be removed by pushing down on the top clip and then pulling the link up and out.
1. Remove chassis wall links from packaging.
2. Starting with the bottom-most tray. Attach the two bottom clips of the chassis wall links into the square
notches on the chassis side wall (Fig. 4-6) .
3. Rotate chassis wall links upward until the top clip snaps into place on the chassis side wall (Fig. 4-6) .
4. Attach other end of links to tray by squeezing both centers together until they click into place on the bottom-
most tray (Fig. 4-7) .
5. Repeat steps on all right and left trays.
Fig. 4-5: Rear door