Amphenol 240GT54 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 47

Amphenol 240GT54 Скачать руководство пользователя страница 47

47

240GT54/nrg240GT54

Amphenol Network Solutions

All rights reserved. 6.5.2020 150567

509.926.6000

— amphenol-ns.com.com

Section Four: Notices (nrgSMART Versions)

4.1 FCC Class A Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause

undesired operation.

NOTE: This equipment has been tested and found to comply with limits for Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at
his own expense.

Modification

Any modifications made to this device that are not approved by Amphenol Network Solutions may void the
authority granted to the user by the FCC to operate this equipment.

4.2 ICES-003 Class A Notice

– Avis NMB-003, Class A

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

ELECTROSTATIC DISCHARGE (ESD) PRECAUTIONS! When handling any electronic component
or assembly you must observe the following antistatic precautions to prevent damage. Always
disconnect power from the server and wear a grounded wrist strap when working around the
Controller. Always wear a grounded wrist strap when handling printed circuit boards.
Treat all assemblies, components and interface connections as static-sensitive.

ELECTROSTATIC DISCHARGE (ESD) PRECAUTIONS

«
...
45
46
47

Содержание 240GT54
















































Отзывы:

Нет отзывов