Amphenol 240GT54 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 47

Amphenol 240GT54 Скачать руководство пользователя страница 31

31

240GT54/nrg240GT54

Amphenol Network Solutions

All rights reserved. 6.5.2020 150567

509.926.6000

— amphenol-ns.com.com

2.5 Circuit Breaker Puller

2.5.1 Removing Circuit Breakers

WARNING! Ensure circuit breaker is in off position before removing from panel.

1. If the breaker has a cover installed, remove it by using a Phillips screwdriver to remove mounting screws.

2. Thread a circuit breaker puller into the captive threaded holes on the front of the circuit breaker.

3. Pull the breaker puller straight back until the circuit breaker is removed from the panel.

4. If the breaker that was removed is not being replaced with a new breaker, ensure the corresponding dip

switch is switch to the off (up) position.

5. If a new breaker is replacing the old breaker, an optional cover can being installed using a Phillips

screwdriver to install the mounting screws.

2.6 Contact Removal Tool

Fig. 2-28: Optional Circuit Breaker Puller PN: 307491

Fig. 2-29: Optional Contact Removal Tool PN: 150797

«
...
29
30
31
32
33
...
»

Содержание 240GT54
















































Отзывы:

Нет отзывов