Amphenol 240GT54 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 47

Amphenol 240GT54 Скачать руководство пользователя страница 26

26

240GT54/nrg240GT54

Amphenol Network Solutions

All rights reserved. 6.5.2020 150567

509.926.6000

— amphenol-ns.com.com

2.2.15 TPA or Breaker Output Wiring (Connectorized Versions)

WARNING! Before connecting output power cables, make sure input power to the panel is turned off.

55. P40 output connectors are available in two sizes, #12-10 AWG and #8-6 AWG. Depending on the Output

connector, crimp terminals onto one end of #12 to #6 AWG copper wires using Daniels M300BT crimp tool
or Burndy Y122CMR crimp tool. (Work with one output wire at a time.)

56. Insert terminals into plug housing as shown in Fig. 2-19 and Fig. 2-20. The battery

terminal goes in the “D”

shaped position on the connector. The return terminal goes in the round housing position.

NOTE:

A good way to remember is “Round = Return”.

57. Insert retainer into plug housing as shown in Fig. 2-21 Ensure the retainer flanges are inserted into the

connector first.

Fig. 2-19: Insert Crimped Terminals

Fig. 2-20: Connector Front View

Fig. 2-21: Insert Retainer

“D” shaped position: Battery

“O” shaped position: Return

«
...
24
25
26
27
28
...
»

Содержание 240GT54
















































Отзывы:

Нет отзывов