Amphenol 240GT54 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 47

Amphenol 240GT54 Скачать руководство пользователя страница 17

17

240GT54/nrg240GT54

Amphenol Network Solutions

All rights reserved. 6.5.2020 150567

509.926.6000

— amphenol-ns.com.com

2.2.6 Input Wiring

WARNING! Before connecting input power cables, make sure input power to the panel is turned off.

13.

Make sure input power is off before connecting the panel’s input cables to the PDU or battery.

14. For input wiring, crimp dual-hole compression lugs onto 2/0 AWG to 350 MCM copper wires. The choice of

input wiring depends on the following criteria:

•

Input interrupt device rating affects the size of input wiring.

•

Ambient operating temperature affects the type of input wire insulation. For further information,

consult the National Electrical Code (NEC).

15. Insulate the lug barrels with UL94 V-0 rated heat-shrink tubing.

16. Clean terminals and lugs with a non-abrasive, non-metallic pad.

17. If required, lightly coat antioxidant on lugs and input BATT and RTN terminals and then connect lugs to

input terminals, as shown in Fig. 2-6.

18.

Tighten nut to 150 in/lb. (~17 N•m), max.

Fig. 2-7: Input Lugs

«
...
15
16
17
18
19
...
»

Содержание 240GT54
















































Отзывы:

Нет отзывов