Amphenol 125GMT Series, Руководство по установке

Страница: 17 / 26

17
125GMT
Amphenol Network Solutions
All rights reserved. 3.18.20 150566
509.926.6000
— amphenol-ns.com.com
2.2.11 Output wiring (Connectorized versions)
WARNING! Before connecting output power cables, make sure input power to the panel is turned off.
36. Output connectors are available in two sizes, #14-12 AWG and #12-10 AWG. Depending on the output
connector, crimp terminals onto one end of #14 to #10 AWG copper wires using Daniels M300BT crimp
tool or Burndy Y8MRB-1 crimp tool. (Work with one output wire at a time.)
37. Insert terminals into plug housing as shown in Fig. 2-10 and Fig. 2-11. The battery terminal goes in the
position on the connector with 2 locator fins and is
marked “2”. The return terminal goes in the position on
the connector with 1 locator fin and is
marked “1”.
38. Insert retainer into plug housing as shown in Fig. 2-12.
Fig. 2-10: Insert crimped terminals
Fig. 2-11: Connector front view
Fig. 2-12: Insert retainer
1 Locator Fin: Return
2 Locator Fins: Battery