13
C2X
Amphenol Telect
All rights reserved. 07.10.18 149825 A0
1-509-926-6000
Section Three: Installation Considerations
WARNING! Fiber cables transmit invisible infrared light. To avoid eye damage or blindness, never
look directly into fibers or connectors.
CAUTION! These instructions presume you have verified the Amphenol Telect equipment being
installed is compatible with the rest of the system including power, ground, circuit protection,
signal characteristics, equipment from other vendors, and local codes or ordinances.
ALERT! This product must be installed and maintained only by qualified technicians.
ALERT! Install this system according to company requirements. It is recommended you install the
system in a Restricted Access Location (RAL) where access is limited through the use of tool, lock
and key, or other means of security and be controlled by the authority responsible for the location.
ALERT! Prior to chassis installation, ensure there is enough space in front and rear to access
cabling.
ALERT! Only use components and crimping tools approved by agencies or certifying bodies
recognized in your country or region, such as Underwriter’s Laboratories (UL), TIA, etc.
3.1 Unpacking
Upon receipt of your order, carefully unpack contents and compare it with the packing list and the order placed.
While items described below are a comprehensive list that includes C2X chassis, trays, doors, bezel, and
splice tray, the contents of your order may vary.
3.1.1 Chassis Contents
•
Installation guide
•
Assembled chassis
– 19-inch or 23-inch
o
Designation cards
o
Front bezel
o
Cable management ears
– 4RU, 3RU, 2RU
o
Doors
3.1.2 Module Configurations
•
All part numbers starting with C2X include trays with shipment
•
All part numbers starting with HX or HX2 do not include trays with shipment, order separately
•
Sold separately
– C2X Tray: part number – C2X-TRAY